Tuesday, March 3, 2009

How to sew a french seam

In honor of my serger being in the shop I have decided to show you how to sew a french seam. This is my favorite way to finish seams in dresses and skirts and requires no fancy equipment or skills. I figured out how to do this myself years ago when I first started sewing for my 1st daughter. I bought her a sweet little jumper dress at a local craft show and this is how the seams were done. I still have a bad habit of turning purchased (even from stores) clothes inside out to see how they were sewn. I imagine I always will. ;)

Anyhow, to do this seam, first be sure you have extra fabric. For M, who is a size 2T, I usually use just one piece of fabric for her skirts with one seam. I would need an extra inch to do this seam. If I were using 2 pieces of fabric for the skirt or dress skirt, add 1 inch to each piece.

Place fabric right side OUT and sew seams.


Now trim seam closely to the stitch.

Turn fabric inside out and iron seam/s down. Now sew along the seams with right sides IN or facing.
Turn fabric right side out and pull against seams to check for any raw edges sticking out. If there are, then turn right side in again and sew further away from edge til no raw edges can be seen from the front side.
The above picture is what your inside seam should look like when finished.

Here is what it will look like from the outside.

2 comments:

. said...

This takes me back to my GCSE Textile lessons at school! Learning all the different kinds of seams and hems.

xMx

YayaOrchid said...

What a nice tutorial! Thank you for sharing! I recently did some French seams on an apron. They do look awesome!

LinkWithin

Related Posts with Thumbnails